 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
Features
Used for control 5V-24V RGB LED strip and low voltage
LED lights, etc. Automatically adapt to DC 5V-24V input
voltage, apply to most normal RGB LED products. Can
use Iphone/Ipod/Ipad and Android devices to control the
color, brightness, modes of the lights.
1. Apply to above Apple 4.1 and Android 2.2 system.
2. Can download the control software from Apple and
Android system for free.
3. Humanized interface design for easy use.
4. 36 predefined modes.
5. 50 customized modes.
Technical
Parameter:
Input voltage: 5V-24V
Output channel: RGB 3 channels
Output channel: RGB 3 channels
Channel current: 2A/channel, 6Ain total
Output power: 30/72/144W
Control distance:>20m
Weight: 49.8g
 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
Instructions:
1. Connect the controller with the strips.
2. After install the control software, make sure the WI-FI
network of Apple or Android device is open and choose PlayLED access. Open the PlayLED II or PlayLED RGB software.If the
connection failed, please check the WI-FI connection and restart the
controller. If there is not any prompt pops out, it means the connection
succeed.
 |
| iControl Electroncs Co., Ltd www.icontrol.com.vn |
4. Touch Static Color to
enter static mode: you can use your finger, G-sensor or random choice to choose
the color and the RGB LED lights will show the light color immediately.
 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
5. Touch Dynamic Color to go to dynamic mode. Use finger to
slash from one point to another on the screen, the light will change the color
with mix gradual effect according to the track of your finger on the screen.
 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
6.Touch Mode Select to go to mode select(Figure 7).
B) Under Mode 1: when you choose monochrome as Effect, the light will show the chosen color.
When you choose multiple colors, it won't work. The Speed doesn't work under this mode, but
the Brightness can be adjusted.
C) Under Mode 2: when you choose monochrome as Effect ,the light will show the chosen color
and start the jumping change from dark to bright and bright to dark.When you
choose multiple colors, the light will start the jumping change among the
different color sections. Can use Brightness
to adjust the brightness of the light under this mode, and the Speed can be
used to adjusted the jumping change speed.
D) Under Mode 3: when you choose monochrome as Effect , the
light will show the chosen color and start the gradual change from dark to
bright and bright to dark.When you choose multiple colors, the light will show the
color of first section and proceed the gradual change from dark to bright and
bright to dark, then it will go to the next color section repeat the above
process. The Brightness doesn't work under this mode, but the Speed can be
adjusted to control the gradual change speed.
E) Under Mode 4: when you choose monochrome as Effect , the
light will show the chosen color and start the gradual change from dark to
bright and bright to dark.When you choose multiple color, the light will have the
mix gradual effect of one color becoming bright to dark while the other colors
becoming dark to bright.The Brightness doesn't work under this mode, but
the Speed can be adjusted to control the
mix gradual change speed.
 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
7.Touch More to go to Figure 8.
A) Choose Color Edit to go to Figure 9. Here you can edit the
static color mode of lights. You can choose the color from palette or input the
RGB value directly.
 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
B) Choose Customize Mode to go to Figure 10 where you can
customize the changing modes (50 modes in total).Touch Customize to go to More Edit (Figure 11).
Touch Mode number 1, 2, 3 and 4 to choose the relevant mode(see point 6).
Under Color Effect, choose the exist
color by touching, touch to cancel the chosen
color, touch to go to Figure 12 to choose more color(can be added 10 at most).
 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
C) Choose DIY Mode to
go to Figure 13, here you can DIYthe dynamic modes(50 modes in total): can
choose jumping change color ( 9 colors at the most) and period of each color ;
Can choose gradual change color ( 9 colors at the most) and the period of each
color. Touch DIY to go to Mode Edit (Figure 14): Edit Max Step (can input 1-9）to
define the steps under dynamic mode; Edit
Gradual time to define the mix gradual change time for each step;
Edit Hold Time to define period of each
color under jumping change.Choose Color to go to Set RGB Color(Figure 15) to
set the corresponding color for each step. Every time when you go to Mode Edit
, first set the Max Step, for example 7, and then choose the number beneath the
Step (1 to 7), then set Gradual Time (or
Hold Time) and Color for each step. Please be noted that the setting of
each step must be the same (except color), also when you set Gradual Time(or
Hold Time), then Hold Time (or Gradual Time
) must be 0. After setting choose OK to finish a DIY Mode setting.
 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
If you need to use one Apple or Android device to control
multiple controllers, use laptop to connect WIFI network of controller first,
then open IE explorer, input 192.168.2.3 as address, press ENTER button to go to
controller WIFI network login interface.
Input the username and password, which both are admin, then
click Login to go to network control page.
Click WiFiWizard:
Make the different change of the WIFI network for each
controller, click Finish , then click Accept , after restart of WIFI module,
you can see the new named WIFI in your Apple or Android device.
Warnings:
 |
| iControl Electronics Co., Ltd www.icontrol.com.vn |
Warnings:
1.Please use DC as the power supply for the controller. DO
NOTdirectly use high voltage power.
2.Output power must not be over MAX output power to prevent
burning out the controller.
3.If you lose the WIFI signal during using, please process
the flowing steps:
A)Quit the software, go to background to close the software.
B)Restart controller, cut off the power first then connect
the power again.
C)Go to settings and close and reopen the WIFI network.
D)After re-connect with WIFI network, open PlayLED II
controlsoftware again.
4. Since PlayLED II use the fixed port to visit controller
WIFInetwork, only one Apple or Android
device can be connected with controller, if you cannot connect with controller via WIFI, please confirm whether there is already a device connected with controller.
device can be connected with controller, if you cannot connect with controller via WIFI, please confirm whether there is already a device connected with controller.
5. When installing the controller, first cut off the power
of controller, connect well the LED light with controller, then connect the
controller with power supply.
6.Can only be connected with 5V-24V RGB LED strip and RGB
LED lights, otherwise the controlleror LED strip would be burnt out.
Package list:
1.Controller
2.Instructions
3.Connection terminals(one for 2 wires connection, one for 4
wires connection)
No comments:
Post a Comment